91视频

Skip to Content
Need Help
Statement of Attainment Restricted Electrical Disconnect - Reconnect
Show sidebar
  1. Home
  2. Courses
  3. Trades
  4. Plumbing
  5. Restricted Electrical Disconnect - Reconnect

Overview

This course provides the required knowledge and skills for qualified plumbers and gasfitters to register for a Restricted Electrical Licence (REL). This course is also open to late stage plumbing apprentices who are currently supervised by a supervisor who holds the Restricted Electrical Licence.

This licence will allow you to work on water heaters which are connected to a low voltage wiring installation. The licence is issued by Access Canberra ACT Government and not 91视频.

Qualification:

 Statement of Attainment - Restricted Electrical Disconnect - Reconnect

Next Intake:

 Semester 1 2025

Course No:

 SA-TS102

Campus:

 91视频 Fyshwick 

Duration:

 You will be required to attend 91视频 8-hours per day (face to face) once a week for 10 weeks up to a total of 80 hours, to cover skills and knowledge components.

You will work through a series of learning activities, quizzes and practicals in a portfolio or on 91视频's online learning platform, eLearn.

Cost Info:

Enrolment fees for this course are based on the costs per subject as indicated below. Subject costs identified as Full Fee receive no government subsidy. Concessions are not available. The fees below apply unless training as an apprentice or trainee.

Indicative Cost:

 $2,215

Likely Job Outcome:

 Gives qualified plumbers and gas fitters skills and knowledge to register for Restricted Electrical Licence (REL) through Access Canberra.

Application Type:

 Full Fee
Share:

Additional Information

Licence Eligibility - once enrolled at 91视频, participants are required to apply for a Restricted Disconnect Reconnect permit with Access Canberra, ACT Government.

Entry Requirements

Be a licenced tradesperson employed in the following trades only: Plumbing and gas fitter, Type B gas appliances, or Refrigeration Air Conditioning or other trade that is eligible, where disconnection and reconnection of electrical wiring is a component of the work performed.

OR
Be currently undertaking an apprenticeship in the plumbing trade under the supervision of an individual with a Restricted Electrical Licence.

Skills Recognition

To study any course at 91视频 (excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at 91视频 are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. 91视频 will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, 91视频 may need to cancel or change classes at short notice. 91视频 will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via 91视频 Self Service or by contacting 91视频 Student Services at infoline@cit.edu.au.


Subject Information

Complete 4 subjects

Core: Complete all 4

  • UEERL0004   Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring
    • 91视频 Code: ELEC1570
      Cost: Full fee $800.00
      Description: This unit involves the skills and knowledge required to disconnect and reconnect electrical equipment connected to low voltage (LV) installation wiring. It includes preparing electrical equipment for disconnecting and then reconnecting equipment connected to LV installation wiring. It also includes inspecting and testing the reconnected electrical equipment for safe operation, identifying and reporting electrical faults and providing status reports. This must be incidental to a primary or regular function of the workplace. The unit excludes disconnecting or reconnecting circuits at a switchboard or to general electrical accessories (including switches, socket outlets and circuit protective devices), or installation of or alteration to any part of the fixed electrical wiring system (defined as electrical installation work).The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships. Additional and/or other conditions may also apply under State and Territory legislation and regulations related to licencing, electrical work and work health and safety (WHS)/occupational health and safety (OHS) regulations, which must be confirmed prior to commencing this unit. In some jurisdictions additional information related to licencing may be required on certification documentation. Further guidance can be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
      Prerequisites: UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
  • UEERL0005   Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
    • 91视频 Code: ELEC1591
      Cost: Full fee $800.00
      Description: This unit involves the skills and knowledge required to locate and rectify faults in low voltage (LV) electrical equipment.It includes following workplace procedures to inspect and test electrical equipment, identify and rectify faults and complete reporting. This must be incidental to a primary or regular function of the workplace. The Range of Conditions describes exclusions for this unit of competency.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.Additional and/or other conditions may also apply under State and Territory legislation and regulations related to licencing, electrical work and work health and safety (WHS)/occupational health and safety (OHS) regulations, which must be confirmed prior to commencing this unit.In some jurisdictions additional information related to licencing may be required on certification documentation. Further guidance can be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
      Prerequisites: UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
      UEERL0004 Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring
  • UEERL0001   Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
    • 91视频 Code: ELEC1563
      Cost: Full fee $350.00
      Description: This unit involves the skills and knowledge required to attach flexible cord and plug to electrical equipment for connection to a single phase supplies up to 230 volts (V) alternating current (a.c.) supply.It includes planning and attaching flexible cord and plug, using test equipment for inspection and safety testing. It also includes locating, inspecting, testing and repairing faults in flexible cords and plugs.This unit does not cover the knowledge and skills necessary for work associated with high current faults on complex electrical apparatus, circuits and electrical work; in hazardous areas or on electrical equipment that is part of an explosion-protection technique; nor, work associated with fixed wiring.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
      Prerequisites: UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
  • UEECD0007   Apply work health and safety regulations, codes and practices in the workplace
    • 91视频 Code: ELEC1369
      Cost: Full fee $265.00
      Description: This unit involves the skills and knowledge required to apply work health and safety (WHS)/occupational health and safety (OHS) regulations and codes of practices in the electrotechnology workplace.It includes applying safe working practices, following workplace procedures for hazard identification and risk control. It also includes electrotechnology worker responsibilities and application for health and safety, risk management and adherence to safety practices as part of electrotechnology work functions when preparing to enter a work area.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil

Related Courses

Certificate III Plumbing CPC32420
Certificate III Roof Plumbing CPC32620
Certificate II Drainage CPC20720
Statement Attainment Water Plumbing (Licensing)
Statement Attainment Drainage (Licensing)
Statement Attainment Plumbing Work Practice
Statement Attainment Gasfitting Plumbing (Licensing)
Statement Attainment Backflow Prevention
Statement Attainment Sanitary Pipework (Licensing)
Statement Attainment Plumbing Prevocational Skills
Statement Attainment Hot Water Temperature Control Devices
Statement Attainment training Duct Installation

More Information

For more information about this course please contact 91视频 Student Services on (02) 6207 3188 or email infoline@cit.edu.au